Termopar ESP8266 y MAX6675

elmaya
Mensajes: 1482
Registrado: Mié Jun 27, 2018 5:48 pm
Ubicación: El Saucejo - Sevilla

Sonda para altas temperaturas.

Conexionado:

CFG BUTTON = GPIO 0 // D3 botón configuración
status_led = GPIO 2 // D4
max6675 DO = GPIO 14 // D5
max6675 CS = GPIO 12 // D6
max6675 CLK = GPIO 13 // D7

Para acceder al modo de configuración WiFi, mantenga presionado el botón durante al menos 10 segundos.
Cuando está en modo de configuración WiFi, el dispositivo entra en modo Punto de acceso WiFi y el LED de estado se enciende.

Para ingresar o cambiar la configuración:
- Inicie sesión en https://cloud.supla.org (el registro es gratuito) y Active el registro para nuevo dispositivo.
- Conéctese a la WiFi llamada "K_Probe" desde cualquier ordenador con una tarjeta de red inalámbrica y un navegador de Internet.
- Abra la Página: http://192.168.4.1
- Pulse en configure WiFi.
Imagen
- En la página de configuración
- Seleccione la red WiFi en la parte superior pulsando la que corresponda y después ingrese la contraseña en Password.
- ingrese los datos para "suplaServer (svrX.supla.org), Email(Email de registro en supla) y Supla Device Name (nombre con el que se verá en la nube)"
- Para terminar pulse en Save para guardar los datos de configuración.
Imagen

Actualización de Firmware a través del navegador web OTA: http: // XX: 81 / update
xx = IP del dispositivo. Por ejemplo http://192.168.1.22:81/update
Usuario: admin
Contraseña: pass

Código: Seleccionar todo

/*
Copyright (C) AC SOFTWARE SP. Z O.O.

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
*/
#include <FS.h>       // ---- esp board manager 2.5.2 --- iwip Variant V2 higher Bandwidth
#include <SPI.h>
#include <SuplaDevice.h>  //------- https://github.com/SUPLA/arduino/tree/develop
#include <WiFiManager.h>
#include <ArduinoJson.h> //--------- https://github.com/bblanchon/ArduinoJson/tree/v5.13.2 ------
#include <EEPROM.h>
#include <ESP8266WebServer.h>
#include <ESP8266HTTPUpdateServer.h>
#include <ESP8266TrueRandom.h>
#include <max6675.h>
#include <supla/network/esp_wifi.h>
Supla::ESPWifi wifi("", "");  //------ Do not change----wifimanager takes care------

extern "C"
{
#include "user_interface.h"
}

//#define D0 16  //no internal pullup resistor
//#define D1  5
//#define D2  4
//#define D3  0  //must not be pulled low during power on/reset, toggles value during boot
//#define D4  2  //must not be pulled low during power on/reset, toggles value during boot
//#define D5 14
//#define D6 12
//#define D7 13
//#define D8 15  //must not be pulled high during power on/reset

#define PUYA_SUPPORT 1//PUYASUPPORT
#define status_led 2   // D4
#define wificonfig_pin 0  // D3  WiFiconfig 
int thermoDO = 14; //D5
int thermoCS = 12; //D6
int thermoCLK = 13;//D7

MAX6675 thermocouple(thermoCLK, thermoCS, thermoDO);

char Supla_server[81]=("Unknown server address");
char Email[81]=("Unknown email address");                        
char Supla_name[51];
char Supla_status[51];
int C_W_state = HIGH; 
int last_C_W_state = HIGH;
unsigned long time_last_C_W_change = 0; 
long C_W_delay = 10000;                      // config delay 10 seconds        
bool shouldSaveConfig = false;
bool initialConfig = false; 
char GUID[SUPLA_GUID_SIZE];
char AUTHKEY[SUPLA_AUTHKEY_SIZE];
byte uuidNumber[16];
int s;
bool starting = true; 

ESP8266WebServer httpServer(81);
ESP8266HTTPUpdateServer httpUpdater;
WiFiManager wifiManager;

void saveConfigCallback () {          
  Serial.println("Should save config");
  shouldSaveConfig = true;
}
void ondemandwifiCallback () {
 digitalWrite(status_led, LOW);
   WiFiManagerParameter custom_Supla_server("server", "supla server", Supla_server, 81,"required");
   WiFiManagerParameter custom_Email("email", "Email", Email, 81,"required");
   WiFiManagerParameter custom_Supla_name("name", "Supla Device Name", Supla_name, 51,"required");
   WiFiManagerParameter custom_Supla_status("status", "Supla Last State", Supla_status, 51,"readonly");

   wifiManager.setBreakAfterConfig(true);
   wifiManager.setSaveConfigCallback(saveConfigCallback);
  
   wifiManager.addParameter(&custom_Supla_server);
   wifiManager.addParameter(&custom_Email);
   wifiManager.addParameter(&custom_Supla_name);
   wifiManager.addParameter(&custom_Supla_status);

   wifiManager.setCustomHeadElement("<style>html{ background-color: #01DF3A;}</style><div class='s'><svg version='1.1' id='l' x='0' y='0' viewBox='0 0 200 200' xml:space='preserve'><path d='M59.3,2.5c18.1,0.6,31.8,8,40.2,23.5c3.1,5.7,4.3,11.9,4.1,18.3c-0.1,3.6-0.7,7.1-1.9,10.6c-0.2,0.7-0.1,1.1,0.6,1.5c12.8,7.7,25.5,15.4,38.3,23c2.9,1.7,5.8,3.4,8.7,5.3c1,0.6,1.6,0.6,2.5-0.1c4.5-3.6,9.8-5.3,15.7-5.4c12.5-0.1,22.9,7.9,25.2,19c1.9,9.2-2.9,19.2-11.8,23.9c-8.4,4.5-16.9,4.5-25.5,0.2c-0.7-0.3-1-0.2-1.5,0.3c-4.8,4.9-9.7,9.8-14.5,14.6c-5.3,5.3-10.6,10.7-15.9,16c-1.8,1.8-3.6,3.7-5.4,5.4c-0.7,0.6-0.6,1,0,1.6c3.6,3.4,5.8,7.5,6.2,12.2c0.7,7.7-2.2,14-8.8,18.5c-12.3,8.6-30.3,3.5-35-10.4c-2.8-8.4,0.6-17.7,8.6-22.8c0.9-0.6,1.1-1,0.8-2c-2-6.2-4.4-12.4-6.6-18.6c-6.3-17.6-12.7-35.1-19-52.7c-0.2-0.7-0.5-1-1.4-0.9c-12.5,0.7-23.6-2.6-33-10.4c-8-6.6-12.9-15-14.2-25c-1.5-11.5,1.7-21.9,9.6-30.7C32.5,8.9,42.2,4.2,53.7,2.7c0.7-0.1,1.5-0.2,2.2-0.2C57,2.4,58.2,2.5,59.3,2.5z M76.5,81c0,0.1,0.1,0.3,0.1,0.6c1.6,6.3,3.2,12.6,4.7,18.9c4.5,17.7,8.9,35.5,13.3,53.2c0.2,0.9,0.6,1.1,1.6,0.9c5.4-1.2,10.7-0.8,15.7,1.6c0.8,0.4,1.2,0.3,1.7-0.4c11.2-12.9,22.5-25.7,33.4-38.7c0.5-0.6,0.4-1,0-1.6c-5.6-7.9-6.1-16.1-1.3-24.5c0.5-0.8,0.3-1.1-0.5-1.6c-9.1-4.7-18.1-9.3-27.2-14c-6.8-3.5-13.5-7-20.3-10.5c-0.7-0.4-1.1-0.3-1.6,0.4c-1.3,1.8-2.7,3.5-4.3,5.1c-4.2,4.2-9.1,7.4-14.7,9.7C76.9,80.3,76.4,80.3,76.5,81z M89,42.6c0.1-2.5-0.4-5.4-1.5-8.1C83,23.1,74.2,16.9,61.7,15.8c-10-0.9-18.6,2.4-25.3,9.7c-8.4,9-9.3,22.4-2.2,32.4c6.8,9.6,19.1,14.2,31.4,11.9C79.2,67.1,89,55.9,89,42.6z M102.1,188.6c0.6,0.1,1.5-0.1,2.4-0.2c9.5-1.4,15.3-10.9,11.6-19.2c-2.6-5.9-9.4-9.6-16.8-8.6c-8.3,1.2-14.1,8.9-12.4,16.6C88.2,183.9,94.4,188.6,102.1,188.6z M167.7,88.5c-1,0-2.1,0.1-3.1,0.3c-9,1.7-14.2,10.6-10.8,18.6c2.9,6.8,11.4,10.3,19,7.8c7.1-2.3,11.1-9.1,9.6-15.9C180.9,93,174.8,88.5,167.7,88.5z'/></svg>");
   wifiManager.setMinimumSignalQuality(8);
   //wifiManager.setShowStaticFields(true); // force show static ip fields
   //wifiManager.setShowDnsFields(true);    // force show dns field always
   wifiManager.setConfigPortalTimeout(180);

   if (!wifiManager.startConfigPortal("K_Probe")) { Serial.println("Not connected to WiFi but continuing anyway.");} else { Serial.println("connected...yeey :)");}                
    strcpy(Supla_server, custom_Supla_server.getValue());
    strcpy(Email, custom_Email.getValue());
    strcpy(Supla_name, custom_Supla_name.getValue()); 
    if(strcmp(Supla_server, "get_new_guid_and_authkey") == 0){
      Serial.println("new guid & authkey.");
      EEPROM.write(300, 0);
      EEPROM.commit();
      ESP.reset(); 
    }
    WiFi.softAPdisconnect(true);   //  close AP
}
void status_func(int status, const char *msg) {    //    ------------------------ Status --------------------------
  if (s != status){
    s = status; 
      if (s != 10){
        strcpy(Supla_status, msg); 
  }  }            
}
void guid_authkey(void) {
  if (EEPROM.read(300) != 60){
    int eep_gui = 301;

    ESP8266TrueRandom.uuid(uuidNumber);

    String uuidString = "";
    for (int i = 0; i < 16; i++) {
      int topDigit = uuidNumber[i] >> 4;
      int bottomDigit = uuidNumber[i] & 0x0f;
      uuidString += "0123456789abcdef"[topDigit];
      uuidString += "0123456789abcdef"[bottomDigit];
    }
    int length_uuid = uuidString.length();
    for (int i = 0; i < length_uuid; ++i) {
      EEPROM.put(eep_gui + i, uuidString[i]);
    }

    int eep_aut = 321;

    ESP8266TrueRandom.uuid(uuidNumber);

    String uuidString2 = "";
    for (int i = 0; i < 16; i++) {
      int topDigit = uuidNumber[i] >> 4;
      int bottomDigit = uuidNumber[i] & 0x0f;
      uuidString2 += "0123456789abcdef"[topDigit];
      uuidString2 += "0123456789abcdef"[bottomDigit];
    }
    int length_uuid2 = uuidString2.length();
    for (int i = 0; i < length_uuid2; ++i) {
      EEPROM.put(eep_aut + i, uuidString2[i]);
    }
    EEPROM.write(300, 60);
    EEPROM.commit();
  }
  read_guid();
  read_authkey();
  Serial.print("GUID : ");Serial.println(read_guid()); 
  Serial.print("AUTHKEY : ");Serial.println(read_authkey()); 
}

String read_guid(void) {
  String read_eeprom = "";
  int i, ii = 0;
  int eep_star = 301;
  int end_guid = eep_star + SUPLA_GUID_SIZE;
  String temp_read = "0x";
  for (i = eep_star; i < end_guid + 16;  i = i + 1) {
    temp_read += char(EEPROM.read(i));
    read_eeprom += char(EEPROM.read(i));
    if ( (i % 2) == 0) {
      char *_guid = strcpy((char*)malloc(temp_read.length() + 1), temp_read.c_str());
      GUID[ii] = strtoul( _guid, NULL, 16);
      temp_read = "0x";
      ii++;
    }
  }
  return read_eeprom;
}
String read_authkey(void) {
  String read_eeprom = "";
  int i, ii = 0;
  int eep_star = 321;
  int end_authkey = eep_star + SUPLA_AUTHKEY_SIZE;
  String temp_read = "0x";
  for (i = eep_star; i < end_authkey + 16;  i = i + 1) {
    temp_read += char(EEPROM.read(i));
    read_eeprom += char(EEPROM.read(i));
    if ( (i % 2) == 0) {
      char *_authkey = strcpy((char*)malloc(temp_read.length() + 1), temp_read.c_str());
      AUTHKEY[ii] = strtoul( _authkey, NULL, 16);
      temp_read = "0x";
      ii++;
    }
  }
  return read_eeprom;
}
double get_temperature(int channelNumber, double last_val) {
    double t = -275;

         t = thermocouple.readCelsius();
      
    return t;
}

void setup() {

   wifi_set_sleep_type(NONE_SLEEP_T); 
    
  Serial.begin(115200);  
  pinMode(wificonfig_pin, INPUT_PULLUP);
  pinMode(status_led,OUTPUT); 
  digitalWrite(status_led, HIGH);  
  
  EEPROM.begin(1024);
  if (EEPROM.read(300) != 60){initialConfig = true;} 
  guid_authkey();

  if (WiFi.SSID()==""){ initialConfig = true;} 

  if (SPIFFS.begin()) {  // ------------------------- wificonfig read -----------------
    Serial.println("mounted file system");
    if (SPIFFS.exists("/config.json")) {
      Serial.println("reading config file");
       File configFile = SPIFFS.open("/config.json", "r");
      if (configFile) {
        Serial.println("opened config file");
         size_t size = configFile.size();
         std::unique_ptr<char[]> buf(new char[size]);
         configFile.readBytes(buf.get(), size);
         DynamicJsonBuffer jsonBuffer;         
         JsonObject& json = jsonBuffer.parseObject(buf.get());
         json.printTo(Serial);   //print config data to serial on startup
        if (json.success()) {Serial.println("\nparsed json");         
          strcpy(Supla_server, json["Supla_server"]);
           strcpy(Email, json["Email"]);
           strcpy(Supla_name, json["Supla_name"]);         
        } else {
          Serial.println("failed to load json config");
           initialConfig = true;
        }
        configFile.close(); 
      }
    }
   } else {
    Serial.println("failed to mount FS");
  }
   wifi_station_set_hostname(Supla_name);
   
  WiFi.mode(WIFI_STA); // Force to station mode because if device was switched off while in access point mode it will start up next time in access point mode.

  SuplaDevice.setStatusFuncImpl(&status_func);
  SuplaDevice.setName(Supla_name);
  SuplaDevice.setTemperatureCallback(&get_temperature);
  
  SuplaDevice.addDS18B20Thermometer();


     SuplaDevice.begin(GUID,Supla_server,Email,AUTHKEY);
        
}

void loop() {
   if (initialConfig == true){ondemandwifiCallback();}

   int C_W_read = digitalRead(wificonfig_pin);{  
   if (C_W_read != last_C_W_state) {            
     time_last_C_W_change = millis();
   }
   if ((millis() - time_last_C_W_change) > C_W_delay) {     
     if (C_W_read != C_W_state) {     
       C_W_state = C_W_read;       
       if (C_W_state == LOW) {
        ondemandwifiCallback () ;
       }
     }
    }
   last_C_W_state = C_W_read;            
 }
  
  if (shouldSaveConfig == true) { // ------------------------ wificonfig save --------------
    Serial.println("saving config");
    DynamicJsonBuffer jsonBuffer;
    JsonObject& json = jsonBuffer.createObject();
    json["Supla_server"] = Supla_server;
    json["Email"] = Email;
    json["Supla_name"] = Supla_name;
    File configFile = SPIFFS.open("/config.json", "w");
    if (!configFile) {Serial.println("failed to open config file for writing"); }   
    json.prettyPrintTo(Serial);
    json.printTo(configFile);
    configFile.close();
    Serial.println("config saved");    
    shouldSaveConfig = false;
    initialConfig = false; 
    WiFi.mode(WIFI_STA);   
    delay(5000);
    ESP.restart(); 
  }
     
   SuplaDevice.iterate();
   delay(75);

   if (WiFi.status() == WL_CONNECTED){
    if (starting){
      httpUpdater.setup(&httpServer, "/update", "admin", "pass");
      httpServer.begin(); 
      starting = false;         
     }
    httpServer.handleClient();
   }
}
Sonda_K_DOUT_16Mbit.rar
Firmware compilado
(487.95 KiB) Descargado 206 veces
Responder

Volver a “Ideas y conceptos”