Se encontraron 1266 coincidencias

por elmaya
Lun Ago 02, 2021 4:52 pm
Foro: Projekty użytkowników
Tema: Sterownik LED do podświetlenia schodów, podjazdu i co tam się jeszcze wymyśli
Respuestas: 49
Vistas: 3196

Re: Sterownik LED do podświetlenia schodów, podjazdu i co tam się jeszcze wymyśli

Działa to bardzo fajnie choć wydaje mi się, że wygaszanie fajniej wygląda jak następuje wolniej od zapalania. Fajna opcja z delikatnym podświetleniem pasków jeszcze jak by można by ją było ustawić tak aby złączało się o określonej godzinie i wyłączało. https://en-forum.supla.org/viewtopic.php?p=101...
por elmaya
Lun Ago 02, 2021 4:50 pm
Foro: Ideas and concepts
Tema: Driver to illuminate the stairs, driveway, etc...
Respuestas: 8
Vistas: 278

Re: Driver to illuminate the stairs, driveway, etc...

with half speed when turning off the outputs. I remind you that it has OTA: IP:81/update user = admin password = pass example: 192.168.1.15:81/update #define supla_lib_config_h_ // silences debug messages #include "LittleFS.h" #include <Wire.h> #include <WiFiManager.h> #include <EEPROM.h> ...
por elmaya
Dom Ago 01, 2021 5:25 pm
Foro: Ideas and concepts
Tema: Driver to illuminate the stairs, driveway, etc...
Respuestas: 8
Vistas: 278

Re: Driver to illuminate the stairs, driveway, etc...

To connect the led strip, I have to use something else, can it be directly connected to the PCA9685 you can't connect directly to the PCA9685. you have to use a mosfet and a resistor as seen in the image connected to channel 0. 1 mosfet and 1 resistor for each output. And what kind of mosfet must i...
por elmaya
Dom Ago 01, 2021 3:20 pm
Foro: Ideas and concepts
Tema: Driver to illuminate the stairs, driveway, etc...
Respuestas: 8
Vistas: 278

Re: Driver to illuminate the stairs, driveway, etc...

mirizag escribió:
Dom Ago 01, 2021 3:16 pm
To connect the led strip, I have to use something else, can it be directly connected to the PCA9685
you can't connect directly to the PCA9685.
you have to use a mosfet and a resistor as seen in the image connected to channel 0.
1 mosfet and 1 resistor for each output.
por elmaya
Sab Jul 31, 2021 4:58 pm
Foro: Ideas and concepts
Tema: Driver to illuminate the stairs, driveway, etc...
Respuestas: 8
Vistas: 278

Driver to illuminate the stairs, driveway, etc...

Based on PCA9685 and ESP8266 it is configurable for 2 to 64 PWM output channels. 16 outputs per PCA9685, for 64 outputs you need 4 X PCA9685. It consists of 2 dimmer channels, 3 staircase timer channels and one light switch: the first dimmer set the level of the outputs for when they are on between ...
por elmaya
Lun Jul 26, 2021 3:58 pm
Foro: CLOUD
Tema: Cloud v2.3.32
Respuestas: 66
Vistas: 2044

Re: Cloud v2.3.32

when modifying the duration of the stair timer "seconds on" the button to save changes does not appear
por elmaya
Dom Jul 25, 2021 10:59 am
Foro: Ideas y conceptos
Tema: Dimmer Led 16 canales
Respuestas: 1
Vistas: 114

Dimmer Led 16 canales

Basado en PCA9685 dimmer de 16 canales. Gpio 0 “D3” = WiFiConfig “mantener pulsado al menos 5 segundos”. Gpio 2 “D4” = Led estado “encendido = WiFiConfig, apagado = conectado OK, intermitente = no conectado/conectando”. Gpio4 “D2” = SDA “PCA9685”. Gpio5 “D1” = SCL “PCA9685”. #define supla_lib_config...
por elmaya
Mié Jul 21, 2021 9:14 am
Foro: Help
Tema: Example of using DimmerBase
Respuestas: 12
Vistas: 912

Re: Example of using DimmerBase

Código: Seleccionar todo

dim1->setRGBW(-1, -1, -1, -1, 0);
por elmaya
Vie Jul 16, 2021 9:20 am
Foro: Help
Tema: Example of using DimmerBase
Respuestas: 12
Vistas: 912

Re: Example of using DimmerBase

I finally got a chance to work on this. I had not worked much with classes but your example was very helpful, Thank You! I think I can make it work now. But I have another question. The "setRGBWValueOnDevice" function is returning "brightness" about every 10 digits in steps - up...

Ir a búsqueda avanzada